JCID FACE I’D REPAIR TAG-ON FLEX FOR IPHONE 11 PRO/ 11 PRO MAX

JCID Face ID Repair Tag-On Flex for iPhone 11 Pro / 11 Pro Max

The JCID Face ID Repair Tag-On Flex is a micro-soldering repair solution designed to restore Face ID functionality on the iPhone 11 Pro and iPhone 11 Pro Max when Face ID fails due to flex cable or signal line damage.

Purpose

• Repairs Face ID data line issues without replacing the original Face ID components.

• Enables Face ID to work again while keeping the original paired sensors, which are locked to the logic board by Apple.

How It Works

• The tag-on flex is soldered onto the original Face ID flex cable.

• It rebuilds or bridges damaged signal lines between the Face ID module and the motherboard.

• Designed to work with JCID repair/programming tools for testing, calibration, or verification after installation.

Compatibility

• ✔ iPhone 11 Pro

• ✔ iPhone 11 Pro Max

• ❌ Not compatible with iPhone 11 (standard model)

Common Repair Scenarios

Used when Face ID stops working due to:

• Water or moisture damage

• Torn or cracked Face ID flex cable

• Shorted or broken Face ID data lines

• Face ID failure after screen or housing replacement

Typical errors include:

• “Face ID Not Available”

• Unable to complete Face ID setup

• Face ID suddenly stops working

Installation Requirements

• Advanced micro-soldering skills required

• Not a plug-and-play part

• Installation must be done by a professional repair technician

• Improper installation may cause permanent Face ID damage

Limitations

• Will not repair a completely dead Face ID sensor

• Does not bypass Apple security pairing

• Works only when the original Face ID components are still functional

Key Advantages

• Preserves original Face ID module

• Cost-effective alternative to motherboard repair

• High success rate for flex-related Face ID issues

• Trusted JCID quality for professional repair use